The maintenance procedures for the oxygen permeability tester include regular and routine maintenance to ensure the long-term reliable operation and extended service life of the instrument. The following are specific maintenance steps and precautions:
Regular maintenance: It is recommended to perform maintenance every six months, including cleaning instruments, inspecting instrument accessories, etc. When cleaning, the sample container and vent pipe should be soaked in warm water and cleaned, then sprayed clean with a soft cloth and low-pressure air. Be careful not to clean any coatings or surface coverings.
Daily maintenance: After the test is completed, the equipment should be cleaned in a timely manner and regularly maintained. When cleaning, avoid using organic solvents to wipe the instrument casing, and do not use flammable or corrosive gases for experiments.
Safe operation: When using the oxygen permeability tester, safe ventilation, safe operation, and safe storage must be carried out. Before operation, check whether there is oxygen inside and outside the instrument to ensure free oxygen ventilation; it is prohibited to leave the laboratory or engage in other unrelated operations during the operation process; after use, it should be stored in a well ventilated and dry place, and protective measures should be taken.
Environmental control: The laboratory temperature should be controlled at (23 ± 2) ℃ to avoid frequent personnel movement and minimize the impact on the testing environment. At the same time, ensure that all gas connections are leak free, use high-purity nitrogen (99.99%), and avoid using low purity gases.
By following the above maintenance procedures, the service life of the oxygen permeability tester can be effectively extended, ensuring the accuracy of the test results.





